products details

Home Products

TI Chips

TXS0104EDR TI Chips TXS0104E 4-Bit Bidirectional Voltage Level Translator for Open Drain and Push Pull Applications

All Category

High Power LED Chip

Miss. alice

sales_deng@163.com

+86 18802688921

Contact Now

All Category

TXS0104EDR TI Chips TXS0104E 4-Bit Bidirectional Voltage Level Translator for Open Drain and Push Pull Applications

Brand Name:	TI chips
Model Number:	TXS0104EDR
MOQ:	2500
Packaging Details:	2500PCS/reel
Payment Terms:	T/T

Detail Information

Product Description

Detail Information

Place of Origin:

China

Document:

Model:

TXS0104EDR

Type:

SMD/SMT

Product Name:

TI Chips

Operating Temperature:

- 40 °C ~ + 85 °C

Propagation Delay Time:

260 Ns

Data Rate:

50 Mb/s

Supply Ability:

1000000

Highlight:

TXS0104EDR

TXS0104 TI Chips

4 Bit Level Translator

Product Description

TI chips TXS0104EDR TXS0104E 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

Features

• No direction-control signal needed

• Maximum data rates:

– 24Mbps (push pull)

– 2Mbps (open drain)

• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B

port (VCCA ≤ VCCB)

• No power-supply sequencing required – VCCA or

VCCB can be ramped first

• Latch-up performance exceeds 100 mA per JESD

78, class II

• ESD protection exceeds JESD 22:

– A port:

• 2000-V Human-Body Model (A114-B)

• 200-V Machine Model (A115-A)

• 1000-V Charged-Device Model (C101)

– B port:

• 15-kV Human-Body Model (A114-B)

• 200-V Machine Model (A115-A)

• 1000-V Charged-Device Model (C101)

• IEC 61000-4-2 ESD (B port):

– ±8-kV contact discharge

– ±10-kV air-gap discharge

Applications

• Handset

• Smartphone

• Tablet

• Desktop PC

Description

This 4-bit non-inverting translator uses two separate

configurable power-supply rails. The A port is

designed to track VCCA. VCCA accepts any supply

voltage from 1.65 V to 3.6 V. VCCA must be less

than or equal to VCCB. The B port is designed to

track VCCB. VCCB accepts any supply voltage from 2.3

V to 5.5 V. This allows for low-voltage bidirectional

translation between any of the 1.8-V, 2.5-V, 3.3-V, and

5-V voltage nodes.

When the output-enable (OE) input is low, all outputs

are placed in the high-impedance state.

The TXS0104E is designed so that the OE input

circuit is supplied by VCCA.

For the high-impedance state during power up

or power down, tie OE to GND through a pull-

down resistor; the minimum value of the resistor is

determined by the current-sourcing capability of the

driver

Tags:

OSRAM LED Chip

CREE LED Chip

ST IC Chips

TI Chips

Bridgelux LED Chip

Infineon Chip

LUMINUS LED Chip

LED Lamp Beads

SAMSUNG IC Chips

Micron Chips

SK Hynix Chips

Lumileds LED Chip

SAMSUNG LED Chip

SEOUL LED Chip

NICHIA LED Chip

NeXperia Chips

ONsemi Chips

ADI Chips

TSLC Semileds LED Lamp Beads

High Power LED Chip

OSRAM LED Chip

CREE LED Chip

ST IC Chips

TI Chips

Bridgelux LED Chip

Infineon Chip

LUMINUS LED Chip

LED Lamp Beads

SAMSUNG IC Chips

Micron Chips

SK Hynix Chips

Lumileds LED Chip

SAMSUNG LED Chip

SEOUL LED Chip

NICHIA LED Chip

NeXperia Chips

ONsemi Chips

ADI Chips

TSLC Semileds LED Lamp Beads

High Power LED Chip

products details

TXS0104EDR TI Chips TXS0104E 4-Bit Bidirectional Voltage Level Translator for Open Drain and Push Pull Applications

OSRAM LED Chip

CREE LED Chip

ST IC Chips

TI Chips

Bridgelux LED Chip

Infineon Chip

LUMINUS LED Chip

LED Lamp Beads

SAMSUNG IC Chips

Micron Chips

SK Hynix Chips

Lumileds LED Chip

SAMSUNG LED Chip

SEOUL LED Chip

NICHIA LED Chip

NeXperia Chips

ONsemi Chips

ADI Chips

TSLC Semileds LED Lamp Beads

High Power LED Chip

OSRAM LED Chip

CREE LED Chip

ST IC Chips

TI Chips

Bridgelux LED Chip

Infineon Chip

LUMINUS LED Chip

LED Lamp Beads

SAMSUNG IC Chips

Micron Chips

SK Hynix Chips

Lumileds LED Chip

SAMSUNG LED Chip

SEOUL LED Chip

NICHIA LED Chip

NeXperia Chips

ONsemi Chips

ADI Chips