| Brand Name: | TI Chips |
| Model Number: | TCA9534PWR |
| MOQ: | 2000 |
| Packaging Details: | 2000PCS/reel |
| Payment Terms: | T/T |
TI Chips TCA9534PWR TCA9534 Low Voltage 8-Bit I2C and SMBUS Low-Power I/O Expander
Features
• ESDProtection Exceeds JESD 22– 2000-V Human-Body Model (A114-A)– 1000-V Charged-Device Model (C101)
• LowStandby Current Consumption
• I2C to Parallel Port Expander
• Open-Drain Active-Low Interrupt Output
• Operating Power-Supply Voltage Range of 1.65 V
to 5.5 V
• 5-VTolerant I/O Ports
• 400-kHz Fast I2C Bus
• Three Hardware Address Pins Allow up to Eight
Devices on the I2C/SMBus
• Input and Output Configuration Register
• Polarity Inversion Register
• Internal Power-On Reset
• Power-Up With All Channels Configured as Inputs
• NoGlitch on Power Up
• Noise Filter on SCL/SDA Inputs
• Latched Outputs With High-Current Drive
Maximum Capability for Directly Driving LEDs
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
Applications
• Servers
• Routers (Telecom Switching Equipment)
• Personal Computers
• Personal Electronics (for example: Gaming
Consoles)
• Industrial Automation
• Products With GPIO-Limited Processors
Description
The TCA9534 is a 16-pin device that provides 8 bits
of general purpose parallel input and output (I/O)
expansion for the two-line bidirectional I2C bus (or
SMBus) protocol. The device can operate with a
power supply voltage ranging from 1.65 V to 5.5 V,
which allows for use with a wide range of devices.
The device supports both 100-kHz (Standard-mode)
and 400-kHz (Fast-mode) clock frequencies. I/O
expanders such as the TCA9534 provide a simple
solution when additional I/Os are needed for
switches, sensors, push-buttons, LEDs, fans, and
other similar devices.
The features of the TCA9534 include an interrupt that
is generated on the INT pin. This allows the master to
know when an input port changes state. The A0, A1,
and A2 hardware selectable address pins allow up to
eight TCA9534 devices on the same I2C bus. The
device can also be reset to its default sate by cycling
the power supply and causing a power-on reset.
![]()
![]()