logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
TI Chips
Created with Pixso.

SN74AXCH4T245PWR TI Chips SN74AXCH4T245 Four bit bus transceiver with configurable voltage translation

SN74AXCH4T245PWR TI Chips SN74AXCH4T245 Four bit bus transceiver with configurable voltage translation

Brand Name: TI Chips
Model Number: SN74AXCH4T245PWR
MOQ: 2000
Packaging Details: 2000PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Document:
Model:
SN74AXCH4T245PWR
Product Name:
TI Chips
Type:
SMD/SMT
Propagation Delay Time:
181 Ns
Encapsulation:
Reel
Operating Power Supply Current:
40 UA
Supply Ability:
1000000
Highlight:

SN74AXCH4T245PWR

,

SN74AXCH4T245 TI Chips

,

Four Bit Bus Transceiver

Product Description

TI Chips SN74AXCH4T245PWR SN74AXCH4T245 Four-bit bus transceiver with configurable voltage translation


Features
• Fully configurable dual-rail design allows each
port to operate with a power supply range from
0.65 V to 3.6 V
• Bus-hold on data inputs eliminates the need for
external pullup or pulldown resistors
• Operating temperature from –40°C to +125°C
• Multiple direction control pins to allow
simultaneous up and down translation
• Glitch-free power supply sequencing
• Up to 380 Mbps support when translating from 1.8
V to 3.3 V
• VCC isolation feature
• Ioff supports partial-power-down mode operation
• Compatible with AVC family level shifters
• Latch-up performance exceeds 100 mA per JESD
78, Class II
• ESD protection exceeds JESD 22
– 8000-V Human-body model
– 1000-V Charged-device model

Applications 
• Enterprise and communications
• Industrial
• Personal electronics 
• Wireless infrastructure
• Building automation

Description
The SN74AXCH4T245 is a four-bit noninverting bus
transceiver that uses two individually configurable
power-supply rails. The device is operational with
both VCCA and VCCB supplies as low as 0.65 V. The A
port is designed to track VCCA, which accepts any
supply voltage from 0.65 V to 3.6 V. The B port is
designed to track VCCB, which accepts any supply
voltage from 0.65 V to 3.6 V. The SN74AXCH4T245
device is compatible with a single-supply system.
The SN74AXCH4T245 device is designed for
asynchronous communication between data buses
and transmits data from the A bus to the B bus or
from the B bus to the A bus, depending on the logic
level of the direction-control inputs (1DIR and 2DIR).
The output-enable inputs (1OE and 2OE) are used to
disable the outputs so the buses are effectively
isolated. All control pins (xDIR and xOE) are
referenced to VCCA.
Active bus-hold circuitry holds unused or undriven
inputs at a valid logic state. Use of pullup or pulldown
resistors with the bus-hold circuitry is not
recommended. If a supply is present for VCCA or
VCCB, the bus-hold circuitry always remains active on
the A or B inputs respectively, independent of the
state of the direction control or output enable pins.
To ensure the high-impedance state of the level
shifter I/Os during power up or power down, the xOE
pins should be tied to VCCA through a pullup resistor.
This device is fully specified for partial-power-down
applications using the Ioff current. The Ioff protection
circuitry ensures that no excessive current is drawn
from or sourced into an input, output, or combined I/O
that is biased to a specific voltage while the device is
powered down.
The VCC isolation feature ensures that if either VCCA
or VCCB is less than 100 mV, all I/O ports enter a
high-impedance state by disabling the outputs.
Glitch-free power supply sequencing allows either
supply rail to be powered on or off in any order while
providing robust power sequencing performance.
SN74AXCH4T245PWR TI Chips SN74AXCH4T245 Four bit bus transceiver with configurable voltage translation

SN74AXCH4T245PWR TI Chips SN74AXCH4T245 Four bit bus transceiver with configurable voltage translation