NeXperia chips 74HC4051D,653 8-Channel Analog Multiplexer/Demultiplexer Low ON Resistance
General description
The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in
analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select
inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a
digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes.
This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features and benefits
• Wide analog input voltage range from -5 V to +5 V
• CMOS low power dissipation
• High noise immunity
• Complies with JEDEC standards
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Low ON resistance:
• 80 Ω (typical) at VCC - VEE = 4.5 V
• 70 Ω (typical) at VCC - VEE = 6.0 V
• 60 Ω (typical) at VCC - VEE = 9.0 V
• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
• Typical ‘break before make’ built-in
• ESD protection:
• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
• Multiple package options
• Specified from -40 °C to +85 °C and -40 °C to +125 °C
Applications
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
This 16-pin analog multiplexer/demultiplexer features a LOW-active enable input (E), three select inputs (S0, S1, S2) to route 8 independent I/O channels (Y0–Y7) to a common I/O (Z), and supports dual supply voltages (VCC, VEE) alongside a ground (GND) connection.