logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
TI Chips
Created with Pixso.

DRV8412 TI Chips High Efficiency Dual Full Bridge Motor Driver 97% Efficiency 52V Max

DRV8412 TI Chips High Efficiency Dual Full Bridge Motor Driver 97% Efficiency 52V Max

Brand Name: TI
Model Number: DRV8412
MOQ: 2500
Packaging Details: 2500PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Document:
Product Name:
TI
Model:
DRV8412
Output Current:
3 A
Operating Power Supply Current:
10.5 MA
Operating Temperature:
- 40 °C~+ 85 °C
Type:
SMD/SMT
Supply Ability:
100000
Highlight:

DRV8412 TI Chips

,

DRV8412 Motor Driver

,

97% Motor Driver

Product Description

TI chips DRV8412 High-Efficiency Dual Full-Bridge Motor Driver  97% Efficiency  52V Ma

 

Features
• High-efficiency power stage (up to 97%) with low
RDS(on) MOSFETs (110mΩ at TJ = 25°C)
• Operating supply voltage up to 52V
• DRV8412 (Power pad down): up to 2 × 3A
continuous output current (2 × 6A peak) in dual
full-bridge mode or 6A continuous current in
parallel mode (12A peak)
• DRV8432 (Power pad up): up to 2 × 7A continuous
output current (2 × 12A peak) in dual full-bridge
mode or 14A continuous current in parallel mode
(24A peak)
• PWM operating frequency up to 500kHz
• Integrated self-protection circuits including
undervoltage, overtemperature, overload, and
short circuit
• Programmable cycle-by-cycle current limit
protection
• Independent supply and ground pins for each half
bridge
• Intelligent gate drive and cross conduction
prevention
• No external snubber or schottky diode is required
 
Applications
Brushed DC and stepper motors
Three-phase permanent magnet synchronous 
motors
Robotic and Haptic control system 
Actuators and pumps 
Precision instruments 
TEC drivers 
LED lighting drivers
 
Description
The DRV841x2 are high-performance, integrated dual
full-bridge motor driver with an advanced protection
system.
Because of the low RDS(on) of the H-Bridge MOSFETs
and intelligent gate drive design, the efficiency of
these motor drivers can be up to 97%. This high
efficiency enables the use of smaller power supplies
and heatsinks, and the devices are good candidates
for energy-efficient applications.
The DRV841x2 requires two power supplies, one at
12V for GVDD and VDD, and another up to 50 V for
PVDD. The DRV841x2 can operate at up to 500kHz
switching frequency while still maintaining precise
control and high efficiency. The devices also have an
innovative protection system safeguarding the device
against a wide range of fault conditions that could
damage the system. These safeguards are short
circuit protection, overcurrent protection, undervoltage
protection, and two-stage thermal protection. The
DRV841x2 has a current-limiting circuit that prevents
device shutdown during load transients such as motor
start-up. A programmable overcurrent detector allows
adjustable current limit and protection level to meet
different motor requirements.
The DRV841x2 has unique independent supply and
ground pins for each half-bridge. These pins make
it possible to provide current measurement through
external shunt resistor and support multiple motors
with different power supply voltage requirements.
DRV8412 TI Chips High Efficiency Dual Full Bridge Motor Driver 97% Efficiency 52V Max