logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
ST IC Chips
Created with Pixso.

ST chip STM32F103RCT6TR High Density 32-bit MCUs Arm Cortex-M3 72MHz 256-512KB Flash 48-64KB SRAM

ST chip STM32F103RCT6TR High Density 32-bit MCUs Arm Cortex-M3 72MHz 256-512KB Flash 48-64KB SRAM

Brand Name: ST IC Chip
Model Number: STM32F103RCT6TR
MOQ: 2500PCS
Packaging Details: 2500PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Model:
STM32F103RCT6TR
Type:
SMD/SMT
Core:
ARM Cortex M3
Data Bus Width:
32 Bit
ADC Resolution:
12 Bit
Maximum Clock Frequency:
72 MHz
Power Supply Voltage:
2 V-3.6 V
Operating Temperature:
- 40 °C~ + 85 °C
Supply Ability:
10000
Highlight:

STM32F103RCT6TR ST chip

,

Arm Cortex-M3 MCUs

,

72MHz MCUs

Product Description

ST chip STM32F103RCT6TR High-Density 32-bit MCUs Arm Cortex-M3 (72MHz) 256-512KB Flash 48-64KB SRAM


High-density performance line Arm®-based 32-bit MCU with 256 to 512KB
Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

Features
• Core: Arm® 32-bit Cortex®-M3 CPU
– 72 MHz maximum frequency, 1.25 DMIPS/MHz
(Dhrystone 2.1) performance at 0 wait state
memory access
– Single-cycle multiplication and hardware
division
• Memories
– 256 to 512 Kbytes of Flash memory
– up to 64 Kbytes of SRAM
– Flexible static memory controller with 4 Chip
Select. Supports Compact Flash, SRAM,
PSRAM, NOR and NAND memories
– LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR, and programmable voltage detector
(PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC with calibration
– 32 kHz oscillator for RTC with calibration
• Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
• 3 × 12-bit, 1 µs A/D converters (up to 21
channels)
– Conversion range: 0 to 3.6 V
– Triple-sample and hold capability
– Temperature sensor
• 2 × 12-bit D/A converters
• DMA: 12-channel DMA controller
– Supported peripherals: timers, ADCs, DAC,
SDIO, I2Ss, SPIs, I2Cs and USARTs
• Debug mode
– Serial wire debug (SWD) & JTAG interfaces
– Cortex®-M3 Embedded Trace Macrocell™
• Up to 112 fast I/O ports
– 51/80/112 I/Os, all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
ST chip STM32F103RCT6TR High Density 32-bit MCUs Arm Cortex-M3 72MHz 256-512KB Flash 48-64KB SRAM
• Up to 11 timers
– Up to four 16-bit timers, each with up to 4
IC/OC/PWM or pulse counter and quadrature
(incremental) encoder input
– 2 × 16-bit motor control PWM timers with dead
time generation and emergency stop
– 2 × watchdog timers (Independent and Window)
– SysTick timer: a 24-bit downcounter
– 2 × 16-bit basic timers to drive the DAC
• Up to 13 communication interfaces
– Up to 2 × I2C interfaces (SMBus/PMBus)
– Up to 5 USARTs (ISO 7816 interface, LIN, IrDA
capability, modem control)
– Up to 3 SPIs (18 Mbit/s), 2 with I2S interface
multiplexed
– CAN interface (2.0B Active)
– USB 2.0 full speed interface
– SDIO interface
• CRC calculation unit, 96-bit unique ID
• ECOPACK® packages
ST chip STM32F103RCT6TR High Density 32-bit MCUs Arm Cortex-M3 72MHz 256-512KB Flash 48-64KB SRAM
Description
The STM32F103xC, STM32F103xD and STM32F103xE performance line family
incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a
72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and
SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals
connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-
bit timers plus two PWM timers, as well as standard and advanced communication
interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a
CAN.
The STM32F103xC/D/E high-density performance line family operates in the –40 to
+105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of
power-saving mode allows the design of low-power applications.
These features make the STM32F103xC/D/E high-density performance line microcontroller
family suitable for a wide range of applications such as motor drives, application control,
medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial
applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.