ing for high efficiency and long lifetime requirement.
Applications
- Agriculture & Horticulture
- Entertainment
- Indoor Lighting
- Outdoor & Industrial Lighting
Features
- Package: SMT ceramic package with silicone lens
- Typ. Radiation: 120° (Lambertian emitter)
- ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)
- Luminous Flux: typ. 115 lm
- Luminous efficacy: typ. 156 lm/W
This LED component's maximum ratings are defined as follows: The operating temperature (Tₒₚ) ranges from a minimum of -40 °C to a maximum of 125 °C, while the storage temperature (Tₛₜ₉) also spans from -40 °C to 125 °C. The maximum junction temperature (Tⱼ) is specified at 135 °C. For forward current (I_F), the minimum value is 100 mA and the maximum is 1000 mA. The surge current (I_FS) has a maximum rating of 2000 mA, applicable under the conditions of t ≤ 10 μs, duty cycle D = 0.005, and junction temperature Tⱼ = 25 °C. The maximum reverse current (I_R) is 200 mA. Additionally, the ESD withstand voltage (V_ESD) meets the ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) standard with a rating of 8 kV.
Under the test conditions of a forward current (IF) of 350 mA and a junction temperature (TJ) of 25 °C, this LED exhibits the following key characteristics: The peak wavelength (λpeak) is typically 625 nm. For the dominant wavelength (λdom) measured at IF = 350 mA, the minimum value is 609 nm, the typical value is 617 nm, and the maximum value is 620 nm. The spectral bandwidth at 50% of the relative maximum luminous intensity (Δλ) is typically 16 nm. The viewing angle at 50% of the vertical luminous intensity (2φ) has a typical value of 120°. Regarding the forward voltage (VF) tested at IF = 350 mA, the minimum value is 1.80 V, the typical value is 2.10 V, and the maximum value is 2.60 V. The reverse voltage (VR) with a reverse current (IR) of 20 mA has a maximum rating of 1.2 V. Additionally, the electrical thermal resistance between the junction and the solder point (RthJSelec.) with an electrical efficiency (ηe) of 50% is typically 2.7 K/W.