logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
ST IC Chips
Created with Pixso.

STM8S003F3P6TR ST IC Chips STM8 8-bit RISC core Up to 16 MHz 8 KB Flash 1 KB RAM 128 Byte EEPROM

STM8S003F3P6TR ST IC Chips STM8 8-bit RISC core Up to 16 MHz 8 KB Flash 1 KB RAM 128 Byte EEPROM

Brand Name: ST
Model Number: STM8S003F3P6TR
MOQ: 2500PCS
Packaging Details: 2500PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Operating Voltage:
2.95 V ~ 5.5 V
Package:
TSSOP20
Operating Temperature:
-40 ℃ ~ 85 ℃
Model:
STM8S003F3P6TR
Product Name:
ST IC Chip
RAM:
1 KByte
Supply Ability:
10000
Highlight:

STM8S003F3P6TR ST IC Chips

,

16MHz ST Chip

,

8 KB Flash ST Chip

Product Description

ST IC chip STM8S003F3P6TR STM8 8-bit RISC core Up to 16 MHz 8 KB Flash / 1 KB RAM / 128 Byte EEPROM

 

Value line, 16-MHz STM8S 8-bit MCU, 8-Kbyte Flash memory,
128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C
 
Features
Core
• 16 MHz advanced STM8 core with Harvard
architecture and 3-stage pipeline
• Extended instruction set
 
Memories
• Program memory: 8 Kbyte Flash memory; data
retention 20 years at 55 °C after 100 cycles
• RAM: 1 Kbyte
• Data memory: 128 bytes true data EEPROM;
endurance up to 100 k write/erase cycles
 
 
Clock, reset and supply management
• 2.95 V to 5.5 V operating voltage
• Flexible clock control, 4 master clock sources
– Low-power crystal resonator oscillator
– External clock input
– Internal, user-trimmable 16 MHz RC
– Internal low-power 128 kHz RC
• Clock security system with clock monitor
• Power management
– Low-power modes (wait, active-halt, halt)
– Switch-off peripheral clocks individually
– Permanently active, low-consumption
power-on and power-down reset
 
 
Interrupt management
• Nested interrupt controller with 32 interrupts
• Up to 27 external interrupts on 6 vectors
 
 
STM8S003F3P6TR ST IC Chips STM8 8-bit RISC core Up to 16 MHz 8 KB Flash 1 KB RAM 128 Byte EEPROM
 
Timers
• Advanced control timer: 16-bit, 4 CAPCOM
channels, 3 complementary outputs, dead-time
insertion and flexible synchronization
• 16-bit general purpose timer, with 3 CAPCOM
channels (IC, OC or PWM)
• 8-bit basic timer with 8-bit prescaler
• Auto wakeup timer
• Window and independent watchdog timers
 
 
Communications interfaces
• UART with clock output for synchronous
operation, SmartCard, IrDA, LIN master mode
• SPI interface up to 8 Mbit/s
• I 2C interface up to 400 Kbit/s
 
Analog to digital converter (ADC)
• 10-bit ADC, ± 1 LSB ADC with up to 5
multiplexed channels, scan mode and analog
watchdog
 
I/Os
• Up to 28 I/Os on a 32-pin package including 21
high-sink outputs
• Highly robust I/O design, immune against
current injection
 
Development support
• Embedded single-wire interface module
(SWIM) for fast on-chip programming and non-
intrusive debugging
 
 
Introduction
This datasheet contains the description of the STM8S003F3/K3 value line features, pinout,
electrical characteristics, mechanical data and ordering information.
•
For complete information on the STM8S microcontroller memory, registers and
peripherals, please refer to the STM8S and STM8A microcontroller families reference
manual (RM0016).
•
For information on programming, erasing and protection of the internal Flash memory
please refer to the PM0051 (How to program STM8S and STM8A Flash program
memory and data EEPROM).
•
For information on the debug and SWIM (single wire interface module) refer to the
STM8 SWIM communication protocol and debug module user manual (UM0470).
•
For information on the STM8 core, please refer to the STM8 CPU programming manual
(PM0044).
 
Description
The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program
memory, plus integrated true data EEPROM. They are referred to as low-density devices in
the STM8S microcontroller family reference manual (RM0016).
The STM8S003F3/K3 value line devices provide the following benefits: performance,
robustness and reduced system cost.
Device performance and robustness are ensured by true data EEPROM supporting up to
100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art
technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate
clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock
oscillators, watchdog, and brown-out reset.
Full documentation is offered as well as a wide choice of development tools.
STM8S003F3P6TR ST IC Chips STM8 8-bit RISC core Up to 16 MHz 8 KB Flash 1 KB RAM 128 Byte EEPROM