AMS-OSRAM LED Components LED chip AS5045-ASST 12-Bit Programmable Magnetic Rotary Position Sensor
General Description
The AS5045 is a contactless magnetic position sensor for
accurate angular measurement over a full turn of 360°. It is a
system-on-chip, combining integrated Hall elements, analog
front end and digital signal processing in a single device.
To measure the angle, only a simple two-pole magnet, rotating
over the center of the chip, is required. The magnet may be
placed above or below the IC.
The absolute angle measurement provides instant indication of
the magnet’s angular position with a resolution of
0.0879° = 4096 positions per revolution. This digital data is
available as a serial bit stream and as a PWM signal.
An internal voltage regulator allows the AS5045 to operate at
either 3.3 V or 5 V supplies.
Key Benefits & Features
The benefits and features of AS5045, 12-Bit Programmable
Magnetic Rotary Position Sensor are listed below:
Benefits Highest reliability and durability in harsh environments Great flexibility during assembly Operation safety Lower material cost (no magnetic shielding needed)
Features Contactless absolute angle position measurement User programmable zero position Diagnostic modes for magnet detection and power supply loss Immune to external magnetic stray fields
Two digital 12-bit absolute outputs: • Serial interface and • Pulse width modulated (PWM) output • Failure detection mode for magnet placement monitoring and loss of power supply • “Red-Yellow-Green” indicators display placement of magnet in Z-axis
• Serial read-out of multiple interconnected AS5045 devices using Daisy Chain mode • Tolerant to magnet misalignment and airgap variations • Wide temperature range: - 40ºC to 125ºC • Small Pb-free package: SSOP-16 (5.3mm x 6.2mm)
Block Diagram
The functional blocks of this device are shown below: