AMS-OSRAM LED Components LED chip AS5047P-ATST 14-Bit On-Axis Magnetic Rotary Position Sensor with 12-Bit Decimal
General Description
The AS5047P is a high-resolution rotary position sensor for high
speed (up to 28krpm) angle measurement over a full 360 degree
range. This new position sensor is equipped with revolutionary
integrated dynamic angle error compensation (DAEC™) with
almost 0 latency and offers a robust design that suppresses the
influence of any homogenous external stray magnetic field.
A standard 4-wire SPI serial interface allows a host
microcontroller to read 14-bit absolute angle position data
from the AS5047P and to program non-volatile settings without
a dedicated programmer.
Incremental movements are indicated on a set of ABI signals
with a maximum resolution of 4000 steps /1000 pulses per
revolution in decimal mode and 4096 steps /1024 pulses per
revolution in binary mode. The resolution of the ABI signal is
programmable and can be reduced to 100 steps per revolution,
or 25 pulses per revolution.
Brushless DC (BLDC) motors are controlled through a standard
UVW commutation interface with a programmable number of
pole pairs from 1 to 7. The absolute angle position is also
provided as PWM-encoded output signal.
The AS5047P is available as a single die in a compact 14-pin
TSSOP package.
Key Benefits & Features
The benefits and features of AS5047P, 14-bit On-Axis Magnetic
Rotary Position Sensor with 12-bit Decimal and Binary
Incremental Pulse Count for 28krpm High Speed Capability are
listed below:
Benefits High speed application Easy to use – saving costs on DSP Good resolution for motor and position control
Simple optical encoder replacement No programmer needed (via SPI command) Versatile choice of the interface Lower system costs (no shielding)
Features Up to 28krpm DAEC™ Dynamic angle error compensation 14-bit core resolution
ABI programmable decimal and binary pulse-count: 1000,500,400,300,200,100,50,25,1024,512,256 ppr Zero position, configuration programmable Independent output interfaces: SPI, ABI, UVW, PWM Immune to external stray field
Applications
The AS5047P is ideally suited to support BLDC motor
commutation for the most challenging industrial applications
such as factory automation, building automation, robotics,
PMSM (permanent magnet synchronous motor) and stepper
motors closed loop regulation, as well as optical encoder replacement.
Block Diagram
The functional blocks of this device are shown below: