logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
ADI Chips
Created with Pixso.

ADM3053BRWZ-REEL7 Analog Devices IC Signal Power Isolated CAN Transceiver Integrated Isolated DC/DC Converter

ADM3053BRWZ-REEL7 Analog Devices IC Signal Power Isolated CAN Transceiver Integrated Isolated DC/DC Converter

Brand Name: ADI chips
Model Number: ADM3053BRWZ-REEL7
MOQ: 500
Packaging Details: 500PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Document:
Model:
ADM3053BRWZ-REEL7
Product Name:
ADI Chips
Type:
SMD/SMT
Operating Power Supply Current:
232 MA
Encapsulation:
Reel
Operating Power Supply Voltage:
5 V
Supply Ability:
10000
Highlight:

ADM3053BRWZ-REEL7 CAN Transceiver

,

Analog Devices IC Isolated CAN Transceiver

,

±15 kV ESD CAN Transceiver

Product Description

ADI chips ADM3053BRWZ-REEL7 Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converte


FEATURES
2.5 kV rms signal and power isolated CAN transceiver
isoPower integrated isolated dc-to-dc converter
5 V operation on VCC
5 V or 3.3 V operation on VIO
Complies with ISO 11898 standard
High speed data rates of up to 1 Mbps
Unpowered nodes do not disturb the bus
Connect 110 or more nodes on the bus
Slope control for reduced EMI
Thermal shutdown protection
High common-mode transient immunity: >25 kV/µs
Safety and regulatory approvals
UL 1577
VISO = 2500 Vrms for 1 minute
IEC/EN/CSA 62368-1
IEC/CSA 61010-1
CQC GB4943.1
DIN EN IEC 60747-17 (VDE 0884-17) (pending) 
VIORM = 560 Vpeak
Industrial operating temperature range (−40°C to +85°C)
Available in wide-body, 20-lead SOIC package

APPLICATIONS 
CAN data buses
Industrial field networks

GENERAL DESCRIPTION
The ADM3053 is an isolated controller area network (CAN) physical
layer transceiver with an integrated isolated dc-to-dc converter. The
ADM3053 complies with the ISO 11898 standard.
The device employs Analog Devices, Inc., iCoupler® technology
to combine a 2-channel isolator, a CAN transceiver, and Analog
Devices isoPower® dc-to-dc converter into a single SOIC surface
mount package. An on-chip oscillator outputs a pair of square
waveforms that drive an internal transformer to provide isolated
power. The device is powered by a single 5 V supply realizing a
fully isolated CAN solution.
The ADM3053 creates a fully isolated interface between the CAN
protocol controller and the physical layer bus. It is capable of
running at data rates of up to 1 Mbps.
The device has current limiting and thermal shutdown features
to protect against output short circuits. The part is fully specified
over the industrial temperature range and is available in a 20-lead,
wide-body SOIC package.
The ADM3053 contains isoPower technology that uses high fre-
quency switching elements to transfer power through the transform-
er. Special care must be taken during printed circuit board (PCB)
layout to meet emissions standards. Refer to the AN-0971 Applica-
tion Note, Recommendations for Control of Radiated Emissions
with isoPower Devices, for details on board layout considerations.

FUNCTIONAL BLOCK DIAGRAM
ADM3053BRWZ-REEL7 Analog Devices IC Signal Power Isolated CAN Transceiver Integrated Isolated DC/DC Converter