logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
ADI Chips
Created with Pixso.

MAX4003EUA+T ADI Chips 100MHz-2500MHz 45dB RF Logarithmic Detector UCSP Package

MAX4003EUA+T ADI Chips 100MHz-2500MHz 45dB RF Logarithmic Detector UCSP Package

Brand Name: ADI chips
Model Number: MAX4003EUA+T
MOQ: 500
Packaging Details: 500PCS/reef
Payment Terms: T/T
Detail Information
Place of Origin:
China
Document:
Model:
MAX4003EUA+T
Product Name:
ADI Chips
Type:
SMD/SMT
Frequency Range:
100 MHz To 2.5 GHz
Operating Power Supply Voltage:
5 V
Power Dissipation:
362 MW
Supply Ability:
10000
Highlight:

MAX4003EUA+T RF Detector

,

ADI Chips Logarithmic Detector

,

45dB RF Detector

Product Description

ADI chips MAX4003EUA+T 100MHz to 2500MHz, 45dB RF Detector in a UCSP


General Description
The MAX4003 low-cost, low-power logarithmic amplifier
is designed to detect the power levels of RF power
amplifiers (PAs) operating from 100MHz to 2500MHz. A
typical dynamic range of 45dB makes this logarithmic
amplifier useful in a variety of wireless applications
including cellular handset PA control, TSSI for wireless
terminal devices, and other transmitter power measure-
ments. This logarithmic amplifier provides much wider
measurement range and superior accuracy than typical
diode-based detectors. Excellent temperature stability is
achieved over the full operating range of -40°C to +85°C.
The MAX4003 logarithmic amplifier is a voltage-mea-
suring device with a typical signal range of -58dBV to
-13dBV. The input signal is internally AC-coupled by an
on-chip 5pF capacitor in series with a 2kΩ resistance.
This highpass coupling, with a corner at 16MHz, sets
the lowest operating frequency and allows the input
signal source to be DC grounded. The MAX4003 also
features a power-on delay, which holds the detector
output (OUT) low for approximately 5µs to ensure
glitchless controller output.
The MAX4003 is available in an 8-bump chip-scale pack-
age (UCSP™), an 8-pin µMAX package, and an 8-pin thin
QFN package. The device consumes 5.9mA with a 3.0V
supply and only 13µA when the device is in shutdown.

Applications
Cellular Handsets (TDMA, CDMA, GPRS, GSM)
TSSI for Wireless Terminal Devices
Transmitter Power Measurement and Control
RSSI for Fiber Modules

Features
Complete RF Detector
Frequency Range from 100MHz to 2500MHz
Input Range of -58dBV to -13dBV
(-45dBm to 0dBm into 50Ω)
Fast Response: 70ns in 10dB Steps
Low-Current Consumption: 5.9mA at VCC = 3.0V
13µA (typ) Shutdown Current
Available in 8-Bump UCSP or 8-Pin µMAX and
Thin QFN Packages

Ordering Information
MAX4003EUA+T ADI Chips 100MHz-2500MHz 45dB RF Logarithmic Detector UCSP Package

Pin Configurations
MAX4003EUA+T ADI Chips 100MHz-2500MHz 45dB RF Logarithmic Detector UCSP Package