logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Micron Chips
Created with Pixso.

ATMEGA168PB-AU Microchip High Performance Low Power AVR 8-Bit Microcontroller

ATMEGA168PB-AU Microchip High Performance Low Power AVR 8-Bit Microcontroller

Brand Name: Micron chips
Model Number: ATMEGA168PB-AU
MOQ: 2500
Packaging Details: 2500PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Model:
ATMEGA168PB-AU
Product Name:
Micron Chips
Type:
SMD/SMT
Maximum Clock Frequency:
20 MHz
ADC Resolution:
10 Bit
Supply Voltage:
1.8 V - 5.5 V
Supply Ability:
1000000
Highlight:

ATMEGA168PB-AU

,

ATMEGA168 AVR Microcontroller

,

8 Bit Low Power Microcontroller

Product Description

Micron chips ATMEGA168PB-AU High Performance, Low Power Microchip AVR® 8-Bit Microcontroller Family


Introduction

The ATmega48PB/88PB/168PB is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced 

RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48PB/88PB/

168PB achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize

power consumption versus processing speed.


Features
• High Performance, Low Power Microchip AVR® 8-Bit Microcontroller Family
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 4/8/16KBytes of In-System Self-Programmable Flash program memory
– 256/512/512Bytes EEPROM
– 512/1K/1KBytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True Read-While-Write Operation
– Programming Lock for Software Security
• Microchip QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix™ acquisition
– Up to 64 sense channels
• Peripheral Features
– Two 8-bit Timer/Counters (TC) with Separate Prescaler and Compare Mode
– 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter (RTC) with Separate Oscillator
– Six Pulse Width Modulation (PWM) channels
– 8-channel 10-bit ADC with temperature measurement
– Programmable Serial USART with start-of-frame detection
– Master/Slave SPI Serial Interface
– Byte-oriented Two-Wire Serial Interface (Phillips I2C compatible)
– Programmable Watchdog Timer (WDT) with separate on-chip oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• 256-channel capacitive touch and proximity sensing
• Special Microcontroller Features
– Power-on Reset (POR) and Programmable Brown-out Detection (BOD)
– Internal calibrated oscillator
– External and internal interrupt sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
– Unique Device ID
• I/O and Packages
– 27 Programmable I/O Lines
– 32-lead TQFP and 32-pad VQFN
• Operating Voltage: 1.8 - 5.5V
• Temperature Range: -40°C to 105°C
• Speed Grade: 0 - 4MHz@1.8 - 5.5V, 0 - 10MHz@2.7 - 5.5.V, 0 - 20MHz @ 4.5 - 5.5V
• Power Consumption at 1MHz, 1.8V, 25°C
– Active Mode: 0.35mA
– Power-down Mode: 0.23µA
– Power-save Mode: <1.4µA (Including 32kHz RTC)