logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
ONsemi Chips
Created with Pixso.

FUSB302TMPX ONsemi Chips Programmable USB Type C PD Controller AEC-Q100 Qualified Supports DRP/SRC/SNK

FUSB302TMPX ONsemi Chips Programmable USB Type C PD Controller AEC-Q100 Qualified Supports DRP/SRC/SNK

Brand Name: ONsemi
Model Number: FUSB302TMPX
MOQ: 1000PCS
Packaging Details: 1000PCS/reel
Payment Terms: T/T
Detail Information
Place of Origin:
China
Document:
Product Name:
ONsemi
Model:
FUSB302TMPX
Type:
SMD/SMT
Standard:
USB-C 1.0
Power Supply Voltage:
2.7V-5.5V
Operating Temperature:
- 40 °C~+ 85 °C
Operating Power Supply Current:
25 UA
Highlight:

FUSB302TMPX USB PD Controller

,

ONsemi Chips Programmable USB Controller

,

AEC-Q100 USB PD Controller

Product Description

ONsemi chips FUSB302TMPX Programmable USB Type-C PD Controller AEC-Q100 Qualified Supports DRP/SRC/SNK


Description
The FUSB302T targets system designers looking to implement
USB Type−C wall charger or Travel adaptor. In addition to the default
SRC function, the device supports DRP/ SRC/ SNK with low amount
of programmability.
The FUSB302T enables the USB Type-C detection including
attach/detach, and orientation. The FUSB302T integrates the physical
layer of the USB BMC power delivery protocol to allow up to 100 W
of power and role swap. The BMC PD block enables full support for
alternative interfaces of the Type-C specification.

Features
• Dual-role Functionality with Autonomous DRP Toggle
• Ability to Connect as Either a Host or a Device Based on What Has
Been Attached
• Software Configurable Either as a Dedicated Host, Dedicated
Device, or Dual Role
♦ Dedicated Devices can Operate both on a Type-C Receptacle or
a Type-C Plug with a Fixed CC and VCONN Channel
• Full Type-C 1.2 Support. Integrates the Following Functionality of
the CC Pin:
♦ Attach/Detach Detection as Host
♦ Current Capability Indication as Host
♦ Current Capability Detection as Device
♦ Audio Adapter Accessory Mode
♦ Debug Accessory Mode
♦ Active Cable Detection
• Integrates CCx to VCONN Switch with Over-current Limiting for
Powering USB3.1 Full Featured Cables
• USB Power Delivery (PD) 2.0 Support:
♦ Automatic GoodCRC Packet Response
♦ Automatic Retries of Sending a Packet if a GoodCRC is Not
Received
♦ Automatic Soft Reset Packet Sent with Retries if Needed
♦ Automatic Hard Reset Ordered Set Sent
• Default CC Open for SRC Application
• Low Power Operation: ICC = 25 A (Typical)
• AEC−Q100 Qualified and PPAP Capable
• Packaged in:
♦ 14-lead WQFN (2.5 mm × 2.5 mm, 0.5 mm Pitch)

Applications
• Charging/Wall Adaptors 
• Laptops, Notebooks
• Power Adapters
• Automotive

FUSB302TMPX ONsemi Chips Programmable USB Type C PD Controller AEC-Q100 Qualified Supports DRP/SRC/SNK