Original JU7070B K Class LEDs CCT 2200K 6000K 90 CRI 12V-36V Voltage SMD LED Chip Diode Lamp White
J Series®JU7070B K Class LEDs
PRODUCT DESCRIPTION
J Series® LEDs provide excellent value for general and specialty
lighting applications in the industry’s most common LED package
sizes. JU7070B LEDs deliver excellent LPW up to 12 W and are well
suited for lighting applications that have minimal optical control
requirements. One JU7070B LED can replace many mid‑power
LEDs, leading to system designs that are simpler and more cost
effective.
J Series JU7070B LEDs are optimized for lighting applications
where high light output and simplicity are critical, such as outdoor
area and indoor downlights.
FEATURES
• Industry‑compatible size: 7.0 x 7.0 x 0.8 mm
• 12-V & 36-V configuration
• Flux binned at 25 °C, chromaticity binned at 85 °C
• 6500 K–2200 K ANSI CCTs available for 70, 80, & 90 CRI
• RoHS and REACH compliant
This document presents the key characteristics of the JU7070B 12-V K Class LED. The thermal resistance from junction to solder point is a typical 0.6 °C/W, and the viewing angle (FWHM) is specified at 115 degrees. The temperature coefficient of voltage is -4.2 mV/°C, while the ESD withstand voltage (HBM per Mil-Std-883L) is rated as Class 2. The maximum DC forward current is 1200 mA, and the reverse voltage is limited to 5 V, with a note that continuous reverse voltage can cause damage to the LED. At a drive current of 700 mA and 25 °C, the forward voltage has a typical value of 11.8 V and a maximum of 12.5 V. The maximum allowable LED junction temperature is 125 °C, and the operating temperature range spans from a minimum of -40 °C to a maximum of 105 °C, defining the environmental and electrical boundaries for reliable device operation.