White SMT Package, Colored Diffused Silicone Resin
Supply Ability:
1000000
Highlight:
JTLPS1.EM OSRAM Oslon LED
,
0.5W OSRAM Oslon LED
,
JTLPS1.EM OSRAM LED SMD
Product Description
Original Led Smd Oslon 2835 LED 3V 0.5W 0.2w 1watt OSRAM GW JTLPS1.EM GW JTLRS1.EM Series LED Diode
DURIS®E 2835
GW JTLPS1.EM
The DURIS® E 2835 combines good efficacy and a wide beam angle into a compact format (2.8 mm x 3.5 mm). This is keyto homogeneous illumination applications where the DURIS®E 2835 never fails to impress with its performance on systemlevel.
Applications
- Indoor Lighting
Features
- Package: white SMT package, colored diffused silicone resin
- Typ. Radiation: 120° (Lambertian emitter)
- Color temperature: 2200K - 6500K
- CRI: 80 (min.), 82 (typ.), R9: 0 (min.)
- ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
This LED component's absolute maximum ratings are defined as follows: The operating temperature (Top) ranges from a minimum of -40 °C to a maximum of 100 °C, while the storage temperature (Tstg) also spans from -40 °C to 100 °C. The maximum allowable junction temperature (Tj) is specified at 125 °C. For forward current (IF) tested at Tj=25 °C, the minimum rated value is 10 mA and the maximum is 250 mA. The surge current (IFS) has a maximum rating of 300 mA, applicable under the conditions of pulse duration t≤10μs, duty cycle D=0.005, and junction temperature TJ=25 °C. Additionally, the ESD withstand voltage (VESD) complies with the ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) standard, with a rated value of 2 kV. A note emphasizes the need to use the appropriate derating current to maintain a junction temperature below the maximum allowable limit.
Under the test conditions of a forward current (IF) of 150 mA and a junction temperature (TJ) of 25 °C, this LED component exhibits the following key characteristics: The viewing angle at 50% of the vertical luminous intensity (2φ) has a typical value of 120°. For the forward voltage (VF) measured at IF = 150 mA, the minimum value is 2.70 V, the typical value is 3.05 V, and the maximum value is 3.30 V. The component is not designed for reverse operation, so no reverse current (IR) rating is specified. Regarding color performance, the Color Rendering Index (CRI) has a minimum value of 80 and a typical value of 82, while the CRI (R9) has a minimum value of 0. Additionally, the electrical thermal resistance between the junction and the solder point (RthJSelec.) with an electrical efficiency (ηe) of 44% is typically 25 K/W.