Entertainment - Indoor Lighting-- Medical Lighting
Package:
SMT Ceramic Package With Silicone Lens
Supply Ability:
1000000
Highlight:
CRI95 OSRAM Oslon LED
,
CRI97 OSRAM Oslon LED
,
2700K OSRAM Oslon LED
Product Description
Second Generation OSLON Square GW CSSRM1.BM MQMS MRMT LUMQ LTMP CCT 2700K CRI 95 CRI97 SMD LED CHIP Diode
GW CSSRM1.BM
OSLON®Square
Higher performance. Lower thermal resistance.
Extended range of driving conditions. This is the
second generation OSLON Square.
Applications
— Downlights/Spotlights
Features:
— Package: SMT ceramic package with silicone lens
— Typ. Radiation: 120° (Lambertian emitter)
— Corrosion Robustness Class: 3B
— Color temperature: 2700K - 4000K
— CRI: 95 (min.), 97 (typ.)
— Lumen maintenance: Test results according to IESNA LM-80 available
— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)
— Luminous Flux: typ. 192 lm @ 3000 K, 85 °C
— Luminous efficacy: typ. 98 lm/W @ 3000 K, 85 °C
This section outlines the maximum ratings for the LED component, defining its critical operational, thermal, and electrical limits. The operating temperature range (Top) spans from a minimum of -40 °C to a maximum of 125 °C, while the storage temperature range (Tstg) matches this range, also extending from -40 °C to 125 °C. The absolute maximum junction temperature (Tj,abs) is rated at 150 °C, with the standard maximum junction temperature (Tj) set at 135 °C. For forward current (IF) at a junction temperature of 85 °C, the minimum value is 100 mA and the maximum is 1800 mA. The surge current (IFS) has a maximum rating of 2000 mA, tested under conditions of t≤10μs, duty cycle D=0.005, and a junction temperature of 85 °C. The maximum reverse current (IR) is specified at 200 mA. Additionally, the ESD withstand voltage (VESD) is 8 kV, verified in accordance with the ANSI/ESDA/JEDEC JS-001 standard (HBM, Class 3B). A note clarifies that the absolute junction temperature value is verified by testing 30 pieces, with the pass criteria requiring no catastrophic failures and luminous flux performance better than L70B50 after 1000 hours of operation.
This section details the key optical, electrical, and thermal characteristics of the LED component, measured under standard test conditions of IF=700mA and TJ=85∘C. The typical viewing angle at 50% of the luminous intensity (2φ) is 120 degrees. For forward voltage (VF), the minimum value is 2.70 V, the typical value is 2.80 V, and the maximum value is 3.20 V. The maximum reverse voltage (VR) is 1.2 V, tested at a reverse current (IR) of 20 mA. In terms of color rendering performance for the correlated color temperature range of 2700K to 4000K, the minimum color rendering index (CRI) is 95 with a typical value of 97. The typical electrical thermal resistance between the junction and the solder point (RthJS elec.) is 2.9 K/W, calculated with an efficiency ηe of 32%.