logo
ভালো দাম  অনলাইন

পণ্যের বিবরণ

Created with Pixso. বাড়ি Created with Pixso. পণ্য Created with Pixso.
মাইক্রোন চিপস
Created with Pixso.

AT93C86A-10SU-2.7-T মাইক্রোচিপ 2.7V থ্রি ওয়্যার সিরিয়াল EEPROM 16-Kbit 2K x 8 1K x 16

AT93C86A-10SU-2.7-T মাইক্রোচিপ 2.7V থ্রি ওয়্যার সিরিয়াল EEPROM 16-Kbit 2K x 8 1K x 16

ব্র্যান্ডের নাম: Micron
মডেল নম্বর: AT93C86A-10SU-2.7-T
MOQ: 4000
প্যাকেজিং বিবরণ: 4000 পিসি/রিল
পেমেন্ট শর্তাবলী: টি/টি
বিস্তারিত তথ্য
উৎপত্তি স্থল:
চীন
দলিল:
মডেল:
AT93C86A-10SU-2.7-T
পণ্যের নাম:
মাইক্রোন
এনক্যাপসুলেশন:
রিল
পণ্যের ধরন:
Eeprom
ট্রেডমার্ক:
মাইক্রোচিপ প্রযুক্তি
বৈশিষ্ট্য:
শিল্প তাপমাত্রা পরিসীমা: -40°C থেকে +85°C
যোগানের ক্ষমতা:
1000000
বিশেষভাবে তুলে ধরা:

AT93C86A-10SU-2.7-T

,

AT93C86A সিরিয়াল EEPROM

,

16 Kbit থ্রি ওয়্যার EEPROM

পণ্য বিবরণ

Micron chips AT93C86A-10SU-2.7-T  Three-Wire Serial EEPROM 16-Kbit (2,048 x 8 or 1,024 x 16)


বৈশিষ্ট্য
• Low-Voltage Operation:
– VCC = 1.8V to 5.5V
– VCC = 2.7V to 5.5V
• User-Selectable Internal Organized as 2,048 x 8 (16K) or 1,024 x 16 (16K)
• Industrial Temperature Range: -40°C to +85°C
• Three-Wire Serial Interface
• Sequential Read Operation
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• 2 MHz Clock Rate (5V)
• Self-Timed Write Cycle within 10 ms Maximum
• High Reliability:
– Endurance: 1,000,000 write cycles
– Data retention: 100 years
• Green Package Options (Lead-free/Halide-free/RoHS compliant)

প্যাকেজ
• 8-Lead SOIC, 8-Lead TSSOP, 8-Pad UDFN and 8-Lead PDIP

Package Types (not to scale)
AT93C86A-10SU-2.7-T মাইক্রোচিপ 2.7V থ্রি ওয়্যার সিরিয়াল EEPROM 16-Kbit 2K x 8 1K x 16
বিবরণ
The AT93C86A provides 16,384 bits of Serial Electrically Erasable and Programmable Read-Only Memory
(EEPROM) organized as 1,024 words of 16 bits each (when the ORG pin is connected to VCC) and 2,048 words of 8
bits each (when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial
applications where low‑power and low‑voltage operations are essential. The AT93C86A is available in space-saving
8-lead SOIC, 8-lead TSSOP, 8-pad UDFN and 8-lead PDIP packages. All packages operate from 1.8V to 5.5V or
from 2.7V to 5.5V.
The AT93C86A is enabled through the Chip Select (CS) pin and accessed via a three-wire serial interface consisting
of Data Input (DI), Data Output (DO), and Serial Data Clock (SK). Upon receiving a READ instruction at DI, the
address is decoded, and the data is clocked out serially on the DO pin. The write cycle is completely self-timed, and
no separate erase cycle is required before write. The write cycle is only enabled when the part is in the Erase/Write
Enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the Ready/Busy
status of the part.


Block Diagram
AT93C86A-10SU-2.7-T মাইক্রোচিপ 2.7V থ্রি ওয়্যার সিরিয়াল EEPROM 16-Kbit 2K x 8 1K x 16